PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!

Differentiating Creep versus Bad Timing

Moderators: Paul Arden, Bernd Ziesche, Lasse Karlsson

User avatar
Paul Arden
Site Admin
Posts: 13401
Joined: Thu Jan 03, 2013 11:20 am
Location: Belum Rainforest
Contact:

Re: Differentiating Creep versus Bad Timing

#21

Post by Paul Arden » Thu Mar 26, 2020 1:41 pm

You could take all the pictures I’ve made over the years and open a gallery.
It's an exploration; bring a flyrod.

Flycasting Definitions

User avatar
Carol
Posts: 80
Joined: Mon Mar 09, 2020 2:28 pm
Location: Summit County, Colorado

Re: Differentiating Creep versus Bad Timing

#22

Post by Carol » Thu Mar 26, 2020 2:17 pm

The Paul Arden [broken] Etch Sketch Gallery of Fly Casting.

In our Zoom meeting last night of CCI candidates, JW went through the Bruce Richards' powerpoint of casting mechanics, with the caveat early on that the FFI definitions were labored over for years. Finally, the leader said, essentially, "That's it. We're done. No more haggling. It's not perfect, but we're done." So that is why we find so many definitions wanting. That was followed later in the Zoom discussion by one participant (a scientist and teacher by trade) saying "The whole premise of the definitions is wrong because what is being called a loop is wrong. What we are looking at is a bight, not a loop, unless it's a closed tailing loop." At which time we said, in essence, the definition of a loop is so ingrained in the sport that it is accepted nomenclature. Get over it."
Anyhow, we discussed creep and drag at length. JW mentioned that when we are demonstrating task #2 (wide loop on command), we are using creep after the stop on the wide arc to re-position the rod so that we can make a narrower arc on the back cast, casting a narrow loop. So raising the rod tip from ___ to \\. That's a good example of creep we non-distance casters can relate to.
Carol
Because it's painful getting flies out of spruce trees.

Mangrove Cuckoo
Posts: 314
Joined: Tue Jan 29, 2013 7:51 am

Re: Differentiating Creep versus Bad Timing

#23

Post by Mangrove Cuckoo » Thu Mar 26, 2020 2:37 pm

Carol wrote:
Thu Mar 26, 2020 2:17 pm
That was followed later in the Zoom discussion by one participant (a scientist and teacher by trade) saying "The whole premise of the definitions is wrong because what is being called a loop is wrong. What we are looking at is a bight, not a loop, unless it's a closed tailing loop."
Hah! That makes me smile.

My father (the smartest man I ever met with only a highschool education) taught me that fly casting was all about "buckles and bights". What we all refer to as loop formation, in his terminology, was buckling the flyline; what we now call a loop he called a bight. BTW... bight is the correct terminology for that shape if you are talking about knots and rope-work to a sailor.

I have no idea how or when my father learned to fly cast. I assume it was in the 50s or maybe earlier. And I do not know if those were his terms or if he learned them from somewhere else. I do know that the terms made sense to me, even as a child - something that does not seem to be the case when trying to teach someone to fly cast and calling it a loop!

Sorry I missed the Zoom... I was hoping to catch it.
"Technique is the proof of your seriousness"

Wallace Stevens

User avatar
Paul Arden
Site Admin
Posts: 13401
Joined: Thu Jan 03, 2013 11:20 am
Location: Belum Rainforest
Contact:

Re: Differentiating Creep versus Bad Timing

#24

Post by Paul Arden » Thu Mar 26, 2020 2:46 pm

Well that wouldn’t be Creep with SL Definitions, unless it was done unawares. If it’s done purposefully it is Drift (we don’t specify a direction to Drift).

Bill also uses “forward Drift” in this article https://www.sexyloops.com/articles/adju ... efly.shtml

Sexybights doesn’t have the same ring to it. 😷

Cheers, Paul
It's an exploration; bring a flyrod.

Flycasting Definitions

User avatar
Carol
Posts: 80
Joined: Mon Mar 09, 2020 2:28 pm
Location: Summit County, Colorado

Re: Differentiating Creep versus Bad Timing

#25

Post by Carol » Thu Mar 26, 2020 2:53 pm

It is rotation in the direction of the NEXT cast while the loop is unrolling, so you can't really call it drift. The difference is that it is intentional. So it would seem that none of the definitions fit really well. Let's come up with a new one! :sick:
Carol
Because it's painful getting flies out of spruce trees.

User avatar
Lasse Karlsson
Posts: 4042
Joined: Wed Jan 09, 2013 9:40 pm
Location: There, and back again
Contact:

Re: Differentiating Creep versus Bad Timing

#26

Post by Lasse Karlsson » Thu Mar 26, 2020 2:56 pm

Carol wrote:
Thu Mar 26, 2020 2:17 pm
The Paul Arden [broken] Etch Sketch Gallery of Fly Casting.

In our Zoom meeting last night of CCI candidates, JW went through the Bruce Richards' powerpoint of casting mechanics, with the caveat early on that the FFI definitions were labored over for years. Finally, the leader said, essentially, "That's it. We're done. No more haggling. It's not perfect, but we're done." So that is why we find so many definitions wanting.
Interesting take on it, and not really what I voted on twice as a CBoG 😂
Nevermind, water under the bridge, and since they come with the cavat that they are solely for discussions between instructors, and can and probably should be changed when talking to a student, use the SL ones, they at least work 😉

Cheers
Lasse
Your friendly neighbourhood flyslinger

http://www.karlssonflyfishing.com

***Bring Mark back!!!!!! ***

User avatar
Lasse Karlsson
Posts: 4042
Joined: Wed Jan 09, 2013 9:40 pm
Location: There, and back again
Contact:

Re: Differentiating Creep versus Bad Timing

#27

Post by Lasse Karlsson » Thu Mar 26, 2020 2:57 pm

Carol wrote:
Thu Mar 26, 2020 2:53 pm
It is rotation in the direction of the NEXT cast while the loop is unrolling, so you can't really call it drift. The difference is that it is intentional. So it would seem that none of the definitions fit really well. Let's come up with a new one! :sick:
Drift is repositioning of the rod, direction isn't in there 🙂

Cheers
Lasse
Your friendly neighbourhood flyslinger

http://www.karlssonflyfishing.com

***Bring Mark back!!!!!! ***

User avatar
Paul Arden
Site Admin
Posts: 13401
Joined: Thu Jan 03, 2013 11:20 am
Location: Belum Rainforest
Contact:

Re: Differentiating Creep versus Bad Timing

#28

Post by Paul Arden » Thu Mar 26, 2020 3:05 pm

Drift - to reposition the rod between casting strokes. I certainly can call it Drift! :)

And we have been calling it Drift for decades!

I know it’s hard to not mix definitions but the structure is different. SL has 3-dimensional rod repositioning (Drift), line repositioning (Sweep) and Casting Stroke separated by purpose/intent.

IFF has 2-dimensional rotation and translation pre, during and after the Casting Stroke separated by a rate of acceleration sufficient to cause a loop.

SL definitions are qualitative. IFF are quantitative.

A simple question would be what is the rate of acceleration sufficient to cause a loop? That was originally my idea of how to separate [Forward] Drift (or Creep, if it’s unintentional) from Casting Stroke. It’s unfortunate that the IFF ultimately ran with it and didn’t wait a few more months for us to solve the problem :D

Cheers, Paul
It's an exploration; bring a flyrod.

Flycasting Definitions

User avatar
Lasse Karlsson
Posts: 4042
Joined: Wed Jan 09, 2013 9:40 pm
Location: There, and back again
Contact:

Re: Differentiating Creep versus Bad Timing

#29

Post by Lasse Karlsson » Thu Mar 26, 2020 3:51 pm

Paul Arden wrote:
Thu Mar 26, 2020 3:05 pm

A simple question would be what is the rate of acceleration sufficient to cause a loop? That was originally my idea of how to separate [Forward] Drift (or Creep, if it’s unintentional) from Casting Stroke. It’s unfortunate that the IFF ultimately ran with it and didn’t wait a few more months for us to solve the problem :D

Cheers, Paul
They did wait several months, years actually, still didn't adopt what was working :D

Cheers
Lasse
Your friendly neighbourhood flyslinger

http://www.karlssonflyfishing.com

***Bring Mark back!!!!!! ***

User avatar
Carol
Posts: 80
Joined: Mon Mar 09, 2020 2:28 pm
Location: Summit County, Colorado

Re: Differentiating Creep versus Bad Timing

#30

Post by Carol » Thu Mar 26, 2020 4:23 pm

Hmm. I've printed SL's Flycasting Model an Introduction to the Definitions, and the definitions themselves, and will study them top to bottom using a highlighter and making notes. It will be enlightening.
Carol
Because it's painful getting flies out of spruce trees.

Post Reply

Return to “Teaching”