This video is now live here: http://www.sexyloops.com/flycast/sidewind-off-shoulder/
Cheers, Paul
PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!
Sidewind (off-shoulder)
Moderator: Paul Arden
- Paul Arden
- Site Admin
- Posts: 20896
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Sidewind (off-shoulder)
Nice! I think there is another good reason to angle the rod a bit out to the side in a strong off-shoulder wind and that is simply that a cast with a vertical rod under such conditions becomes very tiring - you really feel the wind pulling and pushing on the rod and it is hard work to keep it traveling straight. It becomes much easier and more comfortable when the rod is angled out a bit to the side.
Cheers Thomas
Cheers Thomas
- Paul Arden
- Site Admin
- Posts: 20896
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Sidewind (off-shoulder)
Hi Thomas, yes I agree!
Thanks, Paul
Thanks, Paul
Sidewind (off-shoulder)
Dear Paul,
I find these videos very helpful. I expect the next video clip will be about how to cope with a strong side wind blowing onto the preferred casting shoulder. This is usually done by taking the rod across to the opposite shoulder to avoid the line blowing onto the caster (I know there are at least two other ways - this one seems easiest for most people, though). If you cover this topic, can you please explain how to get a long-enough casting stroke to avoid tailing loops? My experience is that the casting stroke is limited by the rod hand contacting the down-wind shoulder - the amount of line I can carry without tailing and tangling is thus reduced. Put another way, this is a very "closed" stance. I usually cast with a a very open stance, and a long rod path. This suits the softish rod I often use, and also helps me watch the back cast. I cannot get this casting action to work properly when casting off the opposite side of the body. Some people obviously can do it, so please explain!
Kind regards
Kevin
I find these videos very helpful. I expect the next video clip will be about how to cope with a strong side wind blowing onto the preferred casting shoulder. This is usually done by taking the rod across to the opposite shoulder to avoid the line blowing onto the caster (I know there are at least two other ways - this one seems easiest for most people, though). If you cover this topic, can you please explain how to get a long-enough casting stroke to avoid tailing loops? My experience is that the casting stroke is limited by the rod hand contacting the down-wind shoulder - the amount of line I can carry without tailing and tangling is thus reduced. Put another way, this is a very "closed" stance. I usually cast with a a very open stance, and a long rod path. This suits the softish rod I often use, and also helps me watch the back cast. I cannot get this casting action to work properly when casting off the opposite side of the body. Some people obviously can do it, so please explain!
Kind regards
Kevin
- Paul Arden
- Site Admin
- Posts: 20896
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Sidewind (off-shoulder)
Hi Kevin, yes it is and yes it's in there! I'm in town tomorrow and I'll make the video live from there. It's possible to cast the same distance as you normally shoot using casting shoulder, in fact I know a few guys who actually cast further cross-body.
Instead of describing it now however, I'll just wait until tomorrow
Cheers, Paul
Instead of describing it now however, I'll just wait until tomorrow
Cheers, Paul
- Lasse Karlsson
- Posts: 6063
- Joined: Wed Jan 09, 2013 9:40 pm
- Location: There, and back again
- Contact:
Sidewind (off-shoulder)
Until Paul gets good coverage, try with a closed stance. Casting of the non dominant shoulder means you end up opening up, still not getting as long a stroke as is possible over the normal shoulder, but getting closer to it
Old clip, Pauls is much better, but shorter
Cheers
Lasse
Old clip, Pauls is much better, but shorter
Cheers
Lasse
Your friendly neighbourhood flyslinger
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts