PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!
Lars FP about the bullhsitting line manufacturers
Moderators: Viking Lars, Magnus
- Paul Arden
- Site Admin
- Posts: 19684
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
This was around 2000. http://www.sexyloops.com/advice/lineprofiles.shtml
I found it interesting because Michael told me he had been working outside the AFTM system for years
Cheers, Paul
Edit I’m sure there is a lot of bollocks in there!!
I found it interesting because Michael told me he had been working outside the AFTM system for years
Cheers, Paul
Edit I’m sure there is a lot of bollocks in there!!
- Lasse Karlsson
- Posts: 5801
- Joined: Wed Jan 09, 2013 9:40 pm
- Location: There, and back again
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
So you used to love a brick on a string
Cheers
Lasse
Cheers
Lasse
Your friendly neighbourhood flyslinger
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
- Lasse Karlsson
- Posts: 5801
- Joined: Wed Jan 09, 2013 9:40 pm
- Location: There, and back again
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
True, but there's not that many manufactures in the states that have lines made out of house is there and quite a few of those have their lines made in EuropePaul Arden wrote: ↑Mon Sep 09, 2019 6:34 pm Europe is rather a small market by comparison
I can’t remember where I was last night, how am I expected to remember when SA brought out the GPX?
In Europe everyone and the kitchen sink have their own special lines
Short term memory and long term memory have got nothing on each other mate
Cheers
Lasse
Your friendly neighbourhood flyslinger
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
-
- Posts: 1067
- Joined: Tue Jan 29, 2013 7:51 am
Re: Lars FP about the bullhsitting line manufacturers
I will guess it was almost 20 years ago that I had the pleasure to do an expo with Lefty. The organization supplied the rods and they were beat up demos that were not good.
Lefty asked if anyone had a decent rod so I cheerfully handed him my new TFO that he himself had designed. Talk about kissing up!
Anyway, after the demo Lefty returned my rod and confided that when he tested the prototypes to assign their line rating he had used SA GPX lines. He said to keep that in mind as the GPX lines were heavier than labeled.
So it goes back quite a bit.
Lefty asked if anyone had a decent rod so I cheerfully handed him my new TFO that he himself had designed. Talk about kissing up!
Anyway, after the demo Lefty returned my rod and confided that when he tested the prototypes to assign their line rating he had used SA GPX lines. He said to keep that in mind as the GPX lines were heavier than labeled.
So it goes back quite a bit.
With appreciation and apologies to Ray Charles…
“If it wasn’t for AI, we wouldn’t have no I at all.”
“If it wasn’t for AI, we wouldn’t have no I at all.”
- Paul Arden
- Site Admin
- Posts: 19684
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
Jerry told me a similar thing with Sage around 15 years ago.
-
- Posts: 703
- Joined: Thu Jan 10, 2013 10:45 am
Re: Lars FP about the bullhsitting line manufacturers
If memory serves, SA brought out the Lefty Kreh-taper (I can't remember the exact name) and I *think* that preceded the GPX.
Lars
Lars
- Lasse Karlsson
- Posts: 5801
- Joined: Wed Jan 09, 2013 9:40 pm
- Location: There, and back again
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
Wasn't it Jim Teeny that brought out the Lefty taper? Or did SA have a Lefty before Jim?
Cheers
Lasse
Cheers
Lasse
Your friendly neighbourhood flyslinger
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
Flycasting, so simple that instructors need to make it complicated since 1685
Got a Q++ at casting school, wearing shorts
-
- Posts: 703
- Joined: Thu Jan 10, 2013 10:45 am
Re: Lars FP about the bullhsitting line manufacturers
Hmm, you may be right that Teeny was before SA... I can't remember, I know that SA made it at some point, and I *think* it came before the GPX. Again, not sure. Where's Bruce when you need him :-).
L
L
Re: Lars FP about the bullhsitting line manufacturers
OEM or not ... (most rods aren't "made" by the brand on the stick. Many blanks are made by Maxxia .... ) There is a standard and they don't stick to it. That sucks. However, amreketing seems to work as those working outside the standard seem to sell best. True? ... or am I reading the comments wrong?
- Paul Arden
- Site Admin
- Posts: 19684
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Re: Lars FP about the bullhsitting line manufacturers
There is a problem here Thomas and it actually comes back to fishing and not just matching rod to line.
Let’s take the example today that Gary writes. https://www.sexyloops.com/index.php/ps/ ... ncertainty Irrespective as to whether the line feels comfortable on this rod (I very much doubt it!) the tackle is not now an 8WT but a 10WT. I sometimes use an 8WT for streamer fishing for large trout - but I would never use a 10WT!!!
An even more interesting example I think is trout fishing with fine tippets. We often fish size 20 flies with 7x /.10 tippet. With a 4WT line and a reasonably forgiving rod not a problem. But if that line is a 6WT then you simply cannot fish properly.
It’s like wearing shoes that are too big for you. Yes you can still walk but try to run and you will fall flat on your face!
Cheers, Paul
Let’s take the example today that Gary writes. https://www.sexyloops.com/index.php/ps/ ... ncertainty Irrespective as to whether the line feels comfortable on this rod (I very much doubt it!) the tackle is not now an 8WT but a 10WT. I sometimes use an 8WT for streamer fishing for large trout - but I would never use a 10WT!!!
An even more interesting example I think is trout fishing with fine tippets. We often fish size 20 flies with 7x /.10 tippet. With a 4WT line and a reasonably forgiving rod not a problem. But if that line is a 6WT then you simply cannot fish properly.
It’s like wearing shoes that are too big for you. Yes you can still walk but try to run and you will fall flat on your face!
Cheers, Paul