Does anyone know who produces a 9 weight double taper line in an intermediate or slow sink density?
Thanks in advance,
John
PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!
DT 9 Intermediate or slow sink line
Moderators: Paul Arden, stesiik
- Paul Arden
- Site Admin
- Posts: 19684
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Re: DT 9 Intermediate or slow sink line
Hi John,
To my knowledge you’ll need to buy Chinese.
https://www.colindesignflyfishing.com/p ... m-fly-line
I know this guy, Colin. Lines are ok. Not SA standard. But I’ve tried them and they are functional. The lines he sent me were true to weight and he even sent me a DT sinking line. Generally the lines are a bit softer and not silky smooth. Fine for heads. Maybe even better for heads (the soft part).
Cheers, Paul
To my knowledge you’ll need to buy Chinese.
https://www.colindesignflyfishing.com/p ... m-fly-line
I know this guy, Colin. Lines are ok. Not SA standard. But I’ve tried them and they are functional. The lines he sent me were true to weight and he even sent me a DT sinking line. Generally the lines are a bit softer and not silky smooth. Fine for heads. Maybe even better for heads (the soft part).
Cheers, Paul
-
- Posts: 2196
- Joined: Mon Jan 14, 2013 9:16 pm
Re: DT 9 Intermediate or slow sink line
Thanks Paul, much appreciated. I want the line for an Australian fly accuracy event so "softer" is good.
Thanks again,
John
Thanks again,
John
- Paul Arden
- Site Admin
- Posts: 19684
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Re: DT 9 Intermediate or slow sink line
Let me know how it goes John.
Cheers, Paul
Cheers, Paul
-
- Posts: 2196
- Joined: Mon Jan 14, 2013 9:16 pm
Re: DT 9 Intermediate or slow sink line
Will do Paul,
John
John
-
- Posts: 2196
- Joined: Mon Jan 14, 2013 9:16 pm
Re: DT 9 Intermediate or slow sink line
Thanks Alan,
John
John