I've tried different wire to make my own SW dubbing brushes. Thin copper electrical wire being readily available, But, breaks if you over twist it.
Any suggestions on a wire?
Lou
PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!
Wire for SW dubbing brush
Moderator: Viking Lars
- Paul Arden
- Site Admin
- Posts: 19528
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Wire for SW dubbing brush
Hi Lou,
You’ve managed to confuse me By dubbing brushes do you mean the lollipop stick with Velcro for scruffing up seal fur? I also have a steel brush from Vosseler.
Cheers, Paul
You’ve managed to confuse me By dubbing brushes do you mean the lollipop stick with Velcro for scruffing up seal fur? I also have a steel brush from Vosseler.
Cheers, Paul
Wire for SW dubbing brush
Paul
Sorry for the confusion.
Here's a link that might help explain things.
https://www.epflies.com/estore/brush
Sorry for the confusion.
Here's a link that might help explain things.
https://www.epflies.com/estore/brush
Wire for SW dubbing brush
Beading wire (used for making jewelry). Stainless steel, if you can get it.
Cheers,
Graeme
Cheers,
Graeme
FFi CCI
-
- Posts: 700
- Joined: Thu Jan 10, 2013 10:45 am
Wire for SW dubbing brush
Uni makes a stainless steel dubbing brush wire in two (maybe three) gauges, which I use for all my dubbing brushes. It’s quite good and quite a lot stronger than copper.
Paul, can you post a picture of your Vosseler dubbing brush?
Lars
Paul, can you post a picture of your Vosseler dubbing brush?
Lars
- Paul Arden
- Site Admin
- Posts: 19528
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
Wire for SW dubbing brush
Will do. It’s in England at the moment!
Wire for SW dubbing brush
Lars
Found the Uni wire, thanks.
Lou
Found the Uni wire, thanks.
Lou