PLEASE NOTE: In order to post on the Board you need to have registered. To register please email paul@sexyloops.com including your real name and username. Registration takes less than 24hrs, unless Paul is fishing deep in the jungle!
All those abbreviations
Moderators: Paul Arden, stesiik
All those abbreviations
It's very interesting to read about casting but it can also be a bit frustrating not to understand all the abbreviations being used. Is it only I that don't know them all or does other people also guess sometimes? It would be nice if there could be a thread explaining at least the most used ones for us new here. I understand FC, BC and SLP: Front- and Back Cast, Straight Line Path. But for example RSP1 is something I struggle with understanding.
All those abbreviations
Hi Joakim
There are interesting documents in the articles section of the Sexyloops website (google "articles at Sexyloops"). Look for "The rod and the cast", you will find most abbreviations there.
Merlin
There are interesting documents in the articles section of the Sexyloops website (google "articles at Sexyloops"). Look for "The rod and the cast", you will find most abbreviations there.
Merlin
Fly rods are like women, they won't play if they're maltreated
Charles Ritz, A Flyfisher's Life
Charles Ritz, A Flyfisher's Life
All those abbreviations
Thanks a lot Merlin!
- gordonjudd
- Posts: 1858
- Joined: Sat Jan 19, 2013 11:36 pm
- Location: Southern California
All those abbreviations
Joakim,It would be nice if there could be a thread explaining at least the most used ones for us new here.
You might want to check out the SL abbreviations topic on the old board for just such a list as well.
Gordy
All those abbreviations
Gordy, I'll take a look at that one too. Thank you!
- Paul Arden
- Site Admin
- Posts: 19583
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
All those abbreviations
Any you don't understand please post and I'll explain.
-
- Posts: 13
- Joined: Wed Apr 19, 2017 3:10 pm
All those abbreviations
Hi all,
I had the same piffilus problem when I started to follow the forum and Ennio's definitions helped me a lot.
I have added to the list some other terms often used in many discussions and their meaning (!?) I found reading the forum, someone expert can check if they are correct please.
MCF = Maximum Counterflex
RSP = Rod Straight Position
RSP1 = Rod Straight Position after Unload
RSP2 = Rod Straight Position after Rebound
LSP = Loop Straight Position
MAV = Maximum Angular Velocity
CL = Chord Length
MCL = Minimum Chord Length
CF = Counterflex
MRF = Maximum Rod Flex
LBR = Late Butt Rotation
FC = Forward Cast
BC = Back Cast
CS = Casting Stroke
CA = Casting Analyzer
MED = Scientific Anglers “Mastery Expert Distance” fly line
POWER SNAP = A wrist movement at the end of the forward cast, (turn down your thumb).
DRIFT = Drift backwards with the rod tip after the 'stop’.
TRACKING = The bird's eye path of the rod tip during the stroke. The rod tip must travel from RSP to RSP with no right or left deviation. This is known as tracking.
Thanks in advance
david
I had the same piffilus problem when I started to follow the forum and Ennio's definitions helped me a lot.
I have added to the list some other terms often used in many discussions and their meaning (!?) I found reading the forum, someone expert can check if they are correct please.
MCF = Maximum Counterflex
RSP = Rod Straight Position
RSP1 = Rod Straight Position after Unload
RSP2 = Rod Straight Position after Rebound
LSP = Loop Straight Position
MAV = Maximum Angular Velocity
CL = Chord Length
MCL = Minimum Chord Length
CF = Counterflex
MRF = Maximum Rod Flex
LBR = Late Butt Rotation
FC = Forward Cast
BC = Back Cast
CS = Casting Stroke
CA = Casting Analyzer
MED = Scientific Anglers “Mastery Expert Distance” fly line
POWER SNAP = A wrist movement at the end of the forward cast, (turn down your thumb).
DRIFT = Drift backwards with the rod tip after the 'stop’.
TRACKING = The bird's eye path of the rod tip during the stroke. The rod tip must travel from RSP to RSP with no right or left deviation. This is known as tracking.
Thanks in advance
david
- Paul Arden
- Site Admin
- Posts: 19583
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
All those abbreviations
Hi David, depending on the context CA could also be Casting Arc. Drift is rod repositioning between casting strokes using the SL definitions, and is not only backwards. Our definition of Drift is different from IFFF in this regards.
Tracking is interesting and I think it should be from a point of angle looking down the casting plane and not necessarily from directly above. For example tracking for a horizontal side cast coukd/should be from the side.
Cheers, Paul
Tracking is interesting and I think it should be from a point of angle looking down the casting plane and not necessarily from directly above. For example tracking for a horizontal side cast coukd/should be from the side.
Cheers, Paul
All those abbreviations
Paul, I assume MCL and Max Rod Flex are just different names for the same thing. If not, what's the difference? Thanks.
Cheers,
Jim
Cheers,
Jim
- Paul Arden
- Site Admin
- Posts: 19583
- Joined: Thu Jan 03, 2013 11:20 am
- Location: Belum Rainforest
- Contact:
All those abbreviations
I think MRF is redundant and was replaced by MCL as being a more accurate term. Not sure because I can't remember seeing MRF.
Cheers Paul
Cheers Paul